Public Address Ceiling Speakers
Public Address Wall Mounted Speakers
Public Address Mixer Amplifiers
Public Address Microphones
 |
A-230 (small footprint) only available in 30W
| Power Source |
240 V AC, 50 Hz |
| Rated Output |
30 W |
| Power Consumption |
34 W (AC operation at EN60065) |
| Frequency Response |
50 Hz - 20 kHz |
| Distortion |
1 % or less at 1 kHz, 1/3 rated power |
| Input |
MIC 1: -60 dB* (1.0 mV), 600 Ω, Unbalanced, Equivalent to 5-pin DIN Type
MIC 2: -60 dB* (1.0 mV), 600 Ω, Unbalanced, Equivalent to phone jack Type
AUX 1, 2: -20 dB* (100 mV), 10 kΩ, unbalanced, RCA pin jack |
| Output |
Speaker out: Floating balanced
High impedance: 330 Ω (100 V)
Low impedance: 4 Ω (11 V) |
| S/N Ratio |
60 dB or more (MIC 1, 2)
70 dB or more (AUX 1, 2) |
| Tone Control |
Bass: -10 dB at 100 Hz
Treble: -10 dB at 10 kHz |
| Muting |
MIC 1 overrides other Mic input and AUX inputs with 0 - 30 dB attenuation,
attenuation by switch |
| Indicator |
Power LED, Signal LED |
| Finish |
Panel: ABS resin, black Hair Line
Case: Steel plate, black |
| Dimensions |
350 (W) × 105 (H) × 240 (D) mm (13.78" × 4.13" × 9.45") |
| Weight |
3.5 kg (7.72 lb) |
|
 |
A-2030/60/120/240
| Power Source |
220 - 240 V AC, or 24 V DC |
| Rated Output |
30 W - 60 W - 120 W - 240 W |
| Power Consumption |
34 W (EN60065), 2 A (DC operation at rated output) |
| Frequency Response |
50 - 20,000 Hz (±3 dB) |
| Distortion |
1% or less at 1 kHz, 1/3 rated power |
| Input |
MIC 1: -60 dB*, 600 Ω, balanced, DIN type (5 pins)
MIC 2, 3: -60 dB*, 600 Ω, balanced, phone jack
AUX 1, 2: -20 dB*, 10 kΩ, unbalanced, RCA pin jack
Mute: Contact pin 4 - 5 closure input (for MIC 1) |
| Output |
Speaker out: Balanced (floating), M3.5 screw terminal,
distance between barriers: 8.3 mm (0.33")
High impedance: 330 Ω (100 V), 170 Ω (70 V)
Low impedance: 4 Ω (11 V)
Rec out: 0 dB*, 600 Ω, unbalanced, RCA pin jack |
| Phantom Power |
DC +21 V (MIC 1) |
| S/N Ratio |
60 dB or more |
| Tone Control |
Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz |
| Muting |
MIC 1 overrides other input signals with 0 - 30 dB attenuation by mute terminal
contact in MIC 1 DIN type connector. |
| Finish |
Panel: ABS resin, black
Case: Steel plate, black |
| Dimensions |
420 (W) × 100.9 (H) × 280.3 (D) mm (16.54" × 3.97" × 11.04") |
| Weight |
5 kg (11.05 lb) |
|
