 |
CS-64 6W outdoor splash proof speaker
| Rated Input |
6 W |
| Rated Impedance |
100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 830 Ω (6 W), 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W) |
| Sensitivity |
96 dB (1 W, 1 m) |
| Frequency Response |
130 - 13,000 Hz |
| Speaker Component |
12 cm cone-type (treated for splash proof) |
| Speaker Cord |
2-core cabtyre cord with diameter of 6 mm |
| Temperature Range |
-20℃ to +55℃ |
| Finish |
Horn, cover: ABS resin, off-white, paint
Bracket: Stainless steel
Panched net: Surface treated steel plate, dark-gray, powder coating
Screw: Stainless steel |
| Dimensions |
233 (W) × 224 (H) × 208 (D) mm |
| Weight |
1.5 kg |
|
 |
CS-154 15W outdoor splash speaker (CS-304 30W)
| Horizontal Directivity |
Constant directivity horn 90゜ (±45゜ horizontal from front axis)
93 dB or more (1 W, 1 m), 3 kHz at ±45゜ |
| Speaker Cord |
2-core cabtyre cord with diameter of 6 mm |
| Operating Temperature |
-20℃ to +55℃ |
| Dust/Water Protection |
IP65 |
| Finish |
Horn, cover: ABS resin, off-white, paint
Bracket: Stainless steel
Net: Aluminum, gray, paint
Screw: Stainless steel |
| Dimensions |
366 (W) × 230 (H) × 272 (D) mm |
| Weight |
2.8 kg |
|
 |
SC-610 8 Ω / SC-610M 100V (Paging Horn Speaker - 10W)
| Rated Input |
10 W (Mobile Mount use: 5 W) |
| Rated Impedance |
8 Ω (100V version - SC-610M) |
| Sound Pressure Level |
110 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level) |
| Frequency Response |
315 Hz - 12.5 kHz |
| Dust/Water Protection |
IP65 |
| Polarity |
Hot: Black, Com: White |
| Operating Temperature |
-20 ℃ to +55 ℃ (must be free from dew condensation) |
| Finish |
Horn flare: Aluminum, off-white, powder coating
Reflector horn and rear cover: ABS resin, off-white
Bracket, screws and bolts: Stainless steel
Speaker cable: Polyvinyl chloride insulated cabtyre cable
(6 mm in diameter, 600 mm in length) |
| Dimensions |
172 (W) × 161 (H) × 188 (D) mm |
| Weight |
1 kg |
| Option |
Swivel bracket: YS-151S (Can be used instead of the supplied bracket.) |
|
 |
SC-615 8 Ω / SC-615M 100V (Paging Horn Speaker - 15W)
| Rated Input |
15 W (Mobile Mount use: 10 W) |
| Rated Impedance |
8 Ω (100V version - SC-615M) |
| Sound Pressure Level |
112 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level) |
| Frequency Response |
280 Hz - 12.5 kHz |
| Dust/Water Protection |
IP65 |
| Polarity |
Hot: Black , Com: White |
| Operating Temperature |
-20 ℃ to +55 ℃ (must be free from dew condensation) |
| Finish |
Horn flare: Aluminum, off-white, powder coating
Reflector horn and rear cover: ABS resin, off-white
Bracket, screws and bolts: Stainless steel
Speaker cable: Polyvinyl chloride insulated cabtyre cable
(6 mm in diameter, 600 mm in length) |
| Dimensions |
222 (W) × 179 (H) × 234 (D) mm |
| Weight |
1.1 kg |
| Option |
Swivel bracket: YS-151S (Can be used instead of the supplied bracket.) |
|
 |
SC-630 8 Ω / SC-630M 100V (Paging Horn Speaker - 30W)
| Rated Input |
30 W (Mobile Mount use: 15 W) |
| Rated Impedance |
8 Ω (100V version - SC-630M) |
| Sound Pressure Level |
113 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level) |
| Frequency Response |
250 Hz - 10 kHz |
| Dust/Water Protection |
IP65 |
| Polarity |
Hot: Black, Com: White |
| Operating Temperature |
-20 ℃ to +55 ℃ (must be free from dew condensation) |
| Finish |
Horn flare: Aluminum, off-white, powder coating
Reflector horn and rear cover: ABS resin, off-white
Bracket, screws and bolts: Stainless steel
Speaker cable: Polyvinyl chloride insulated cabtyre cable
(6 mm in diameter, 600 mm in length) |
| Dimensions |
285 (W) × 227 (H) × 277 (D) mm |
| Weight |
1.7 kg |
| Option |
Swivel bracket: YS-151S (Can be used instead of the supplied bracket.) |
|
 |
SC-651 16 Ω (Paging Horn Speaker - 50W)
| Rated Input |
50 W (Mobile Mount use: 30 W) |
| Rated Impedance |
16 Ω |
| Sensitivity |
109 dB (1 W, 1 m) |
| Frequency Response |
250 Hz - 6 kHz |
| Dust/Water Protection |
IP65 |
| Polarity |
Hot: Black, Com: White |
| Operating Temperature |
-20 ℃ to +55 ℃ (-4 ゜F to 131 ゜F) (must be free from dew condensation) |
| Finish |
Horn flare: Aluminum, off-white, powder coating
Reflector horn: ABS resin, off-white
Bracket holder: Aluminum, gray, powder coating
Bracket: Steel, gray, powder coating
Rear cover: ABS resin, gray
Screws and bolts: Stainless steel
Speaker cable: Polyvinyl chloride insulated cabtyre cable
(6 mm (0.24") in diameter, 600 mm (23.62") in length) |
| Dimensions |
430 (W) × 297.5 (H) × 327 (D) mm (16.93" × 11.71" × 12.87") |
| Weight |
3.4 kg (7.5 lb) |
|
 |
BS-1030B 30W - 100V and 8 Ω (white version also available - BS-1030W)
| Enclosure |
2-way bass-reflex type |
| Rated Input |
30 W |
| Rated Impedance |
8 Ω
100 V line: 330 Ω (30 W), 500 Ω (20 W), 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W)
70 V line: 170 Ω (30 W), 250 Ω (20 W), 330 Ω (15 W), 500 Ω (10 W), 1 kΩ (5 W) |
| Sound Pressure Level |
90 dB (1 W, 1 m) |
| Frequency Response |
80 Hz - 20 kHz |
| Speaker Component |
12 cm cone-type + dome-type |
| Speaker Cord |
2-core cabtyre cord with diameter of 6 mm |
| Operating Temperature |
-10 ℃ to +50 ℃ |
| Water Protection |
IPX4 (can be installed vertically or horizontally.*) |
| Finish |
Enclosure: ABS resin, black (RAL9011 GRAPHITE BLACK), paint
Net: Surface treated steel plate, black (RAL9011 GRAPHITE BLACK), powder coating
Bracket: Surface treated steel plate, black equivalent to RAL9011 GRAPHITE BLACK,
powder coating |
| Dimension |
196 (W) × 290 (H) × 150 (D) mm (unit only) |
| Weight |
2.5 kg (unit only) |
| Accessory |
Bracket…1, Bracket mounting screw…2, Bracket mounting washer…2 |
| Option |
Applicable bracket: WCB-13B, SP-410
Applicable stand: ST-16A |
|
 |
BS-633AT (version without attenuator also available - BS-633A)
| Rated Input |
6 W (100 V line), 3 W (70 V line) |
| Rated Impedance |
100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W) |
| Sensitivity |
91 dB (1 W, 1 m) |
| Frequency Response |
120 - 15,000 Hz (-20 dB) |
| Speaker Component |
12 cm (5") cone-type |
| Applicable Cable |
600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16) |
| Connection |
Push-in connector (bridging terminal) |
| Attenuation Level |
3 W: OFF, 1 (-12 dB), 2 (-6 dB), 3 (0 dB)
6 W: OFF, 1 (-13 dB), 2 (-7 dB), 3 (0 dB) |
| Operating Temperature |
-10℃ to +50℃ (14゜F to 122゜F) |
| Finish |
Case: ABS resin, off-white
Rear board: Hard board |
| Dimensions |
173 (W) × 195 (H) × 101 (D) mm (6.81" × 7.68" × 3.98")
(excluding volume control) |
| Wall Mounting Dimensions |
Case front mount: 184 mm (7.24")
Fixing hole mount: 120 mm (4.72") |
| Weight |
810 g (1.79 lb) |
| Accessory |
Speaker mounting screw (4 × 35 (0.16" × 1.38")) … 2,
Speaker mounting screw (4 × 16 (0.16" × 0.63")) … 2 |
|
 |
BS-678T (version without attenuator also available - BS-678)
| Rated Input |
6 W (100 V line), 3 W (70 V line) |
| Rated Impedance |
100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W) |
| Sensitivity |
94 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise) |
| Frequency Response |
150 Hz - 20 kHz (peak -20 dB) |
| Speaker Component |
16 cm (6") double cone-type |
| Applicable Cable |
600 V vinyl-insulated cable (IV wire or HIV wire)
Solid wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16) |
| Connection |
Push-in connector (bridging terminal) |
| Attenuation |
OFF, 1 (-12 dB), 2 (-6 dB), 3 (0 dB) |
| Finish |
Baffle: HIPS, off-white (RAL 9010 or equivalent color)
Cabinet: Particle board with pvc sheet, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color) |
| Dimensions |
250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33")
(excluding volume control knob) |
| Weight |
1.7 kg (3.75 lb) |
| Accessory |
Speaker mounting screw (4 × 35 (0.16" × 1.38")) …2 |
|
 |
BS-1110W
| Rated Input |
10 W |
| Rated Impedance |
100 V line: 1 kΩ (10 W), 2 kΩ (5 W)
70 V line: 500 Ω (10 W), 1 kΩ (5 W)
4 Ω (10 W) |
| Sound Pressure Level |
92 dB (1 W, 1 m) |
| Frequency Response |
150 Hz - 14 kHz |
| Speaker Component |
12 cm cone-type × 2 |
| Applicable Cables |
600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.2 mm
7-core twisted copper wire: 0.75 - 1.25 m㎡ |
| Connection |
Push-in connector (Bridging connections possible) |
| Operating Temperature |
-10 ℃ to +50 ℃ |
| Finish |
Enclosure: Plywood vinyl coating, white (RAL9010 PURE WHITE)
Front: ABS resin, white (RAL9010 PURE WHITE), paint
Rear: Steel plate, white (RAL9010 PURE WHITE), paint |
| Dimensions |
180 (W) × 360 (H) × 100 (D) mm |
| Weight |
2.9 kg (unit only) |
| Accessory |
Mounting bracket…2 |
| Option |
Applicable bracket: YS-301, SP-410, WCB-13W
Applicable stand: ST-16A |
|
 |
BS-1120W
| Rated Input |
20 W |
| Rated Impedance |
100 V line: 500 Ω (20 W), 1 kΩ (10 W)
70 V line: 250 Ω (20 W), 500 Ω (10 W)
8 Ω (20 W) |
| Sound Pressure Level |
95 dB (1 W, 1 m) |
| Frequency Response |
150 - 20,000 Hz |
| Speaker Component |
12 cm cone-type × 4 + balanced dome-type × 1 |
| Applicable Cables |
600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.2 mm
7-core twisted copper wire: 0.75 - 1.25 m㎡ |
| Connection |
Push-in connector (Bridging connections possible) |
| Operating Temperature |
-10℃ to +50℃ |
| Finish |
Enclosure: Plywood vinyl coating, white (RAL9010 PURE WHITE)
Front: ABS resin, white (RAL9010 PURE WHITE), paint
Rear: Steel plate, white (RAL9010 PURE WHITE), paint |
| Dimensions |
180 (W) × 720 (H) × 100 (D) mm |
| Weight |
5.1 kg (unit only) |
| Accessory |
Mounting bracket…2 |
| Option |
Applicable bracket: YS-301 |
|
